Latest recommended config:
_tnx_profile.jcf
"BluetoothSPP": {
"On": true,
"Filter": "RS507",
"PIN": "",
"UseDeviceMajor": false,
"UnpairAll": false,
"DiscoveryOn": false,
"BarcodeType": "FNC3",
"ShowUnpairBarcode": false,
"ScannerType": 2,
"TerminatorWait": 0,
"Terminators": ""
},
Tested successfully on:
| Android Oreo (8.x) | |||||
| Manufacturer | Device | Android Version | Date | Tnx version | Recommended Config |
| Notes | |||||
| Zebra | TC51 | 8.1.0 | 24/07/19 |
Emulator 1.0.11.517 |
"ScannerType": 2, |
|
– The test is old, we recommend using Scanner Type 111 (not tested) – Sometimes it is needed to read the pairing barcode twice with ScannerType 6 |
|||||
| Android Nougat (7.x) – No more tested on this version | |||||
| Manufacturer | Device | Android Version | Date | Tnx version | Config deviation / Notes |
| Zebra | TC51 | 7.1.2 | 18/07/19 | Emulator 1.0.11.512 BT Pairing 7.0.3.549 |
"ScannerType": 2 |
| – Wait for the second beep when pairing scanner | |||||
Recommendations:
- Some devices are not available for testing, despite this, we recommend the use of Scanner Type 111
- Use the Filter parameter as much as you can. It will be easier to establish the connection between devices.
Scanner Type 111:
- The use of ScannerType: 111 for Zebra devices requires the BT Pairing service at Android Accessibility menu option to be activated. In addition, it is convenient to use UnpairAll: false, to avoid having to scan multiple times to connect the scanner. UnPairAll: true could be more problemathic when you stablish the connection between the device and the scanner.
- Before using the scanner, please, scan the SPP mode and the Non-AutoReconnect barcodes:
